HydraPurify™ — Stop Wiping Raw, Skip the Plumber, Feel Actually Clean
High Quality
Free US Shipping
Easy 30 day Returns
Almost out of stock
Stop Wiping Raw — Start Feeling Actually Clean
By the end of the day, your skin shouldn't feel raw. Toilet paper alone doesn't cut it — wet wipes make it worse — and a 4-figure smart toilet seat is overkill. HydraPurify™ snaps onto the toilet you already own in 15 minutes, hits two pressure-adjusted spray modes (front + rear), and rinses its own nozzles after every use. No outlets. No plumber. No torn-up bathroom.
Wet Wipes, "Soft" Paper, Sitz Baths — None of It Is Working
If you've cycled through "flushable" wipes (clogged drains), premium 3-ply (still irritating), and ointments (works after the damage is done), the issue isn't your routine — it's friction. Paper smears. Wipes leave residue. Water rinses. HydraPurify™ replaces the wiping with a targeted, pressure-controlled rinse that leaves nothing to dab off but a quick pat dry.
➤ Two Separate Nozzles for Front and Rear: A dedicated feminine nozzle for a softer, gentler wash, and a separate rear nozzle for a thorough clean. Pick the mode on the chrome dial — water only flows through the nozzle you select.
➤ Slim 6mm Plate That Doesn't Lift Your Seat: The mounting plate sits between your toilet bowl and existing seat at just 6mm thick (0.24 inches). Your seat still closes flat. Your toilet still looks like your toilet — not a science project.
➤ Self-Rinsing Nozzles, No Touching Required: Both nozzles retract behind a protective shield when not in use, and rinse themselves clean every cycle. The water hitting your skin has never touched anything else.
Two Nozzles, One Dial, Zero Electricity Required
Turn the chrome dial one way for the front feminine wash. Turn it the other for the rear wash. The same dial controls pressure — feather-light at the lowest setting, firm enough to actually clean at the highest. Water comes from your existing cold-water supply line via a brass T-adapter (included). No power outlet, no battery, no warm-water tank to leak.
Most bidet attachments give you one nozzle and one direction. The cheap ones use plastic nozzles that crack within months. HydraPurify™ uses stainless-steel nozzle heads and a brass interface at the supply connection — the parts that touch pressurized water are metal, not plastic.
Why Postpartum Moms, Seniors, and Hemorrhoid Sufferers Won't Go Back
The buyers who get the most out of HydraPurify™ are the ones who can't tolerate paper anymore — postpartum recovery, seniors with thinner skin, anyone managing chronic hemorrhoids, IBS, or sensitive skin. They install it once, use the gentle front setting, and stop dreading the bathroom.
"I'd been using wet wipes for two years because of a hemorrhoid flare-up. The wipes were causing more irritation than they were fixing. Got this on a whim, installed it during one episode of TV, and the burn was gone by week two. I keep telling my sister she has to get one." — Linda M.
What Changes the Day You Install It
✓ Cuts Toilet Paper Use by Up to 90%: A pat-dry square replaces a fistful. Your monthly grocery run drops a recurring line item.
✓ Lowest Setting Is Genuinely Gentle: If you've had a baby, a procedure, or a rough flare-up, the lowest pressure feels closer to a warm faucet than a power wash.
✓ Works for Every Body in the House: Mom on the gentle front wash, dad on the firm rear, grandma sitting longer with the pressure dialed low. Same fixture, four different routines.
Install in 15 Minutes — 3 Steps, No Plumber Needed
Step 1: Shut off the toilet's water valve. Unscrew the existing cold-water supply line from the tank, thread the included brass T-adapter onto the inlet, and reattach the supply line on top.
Step 2: Lift the existing toilet seat, slide the slim HydraPurify™ plate over the bowl rim, and tighten the seat back down on top — the plate stays sandwiched between bowl and seat.
Step 3: Connect the included 26-inch braided hose between the T-adapter and the bidet body. Open the water valve. Test the dial. Done.
| HydraPurify™ Bidet Attachment | Toilet Paper + Wet Wipes | Other Budget Bidet Attachments |
|---|---|---|
| Two separate nozzles — feminine front + rear — controlled by one chrome dial | ❌ wiping spreads, doesn't actually clean | ❌ usually one nozzle, one direction |
| 6mm slim plate — your seat still closes flat against the bowl | ❌ no benefit | ❌ thick plates lift the seat or wobble |
| Self-rinsing stainless nozzles + brass T-adapter at supply line | ❌ wipes clog the drain | ❌ all-plastic parts crack within months |
What's in the Box
- Bidet Body: Plastic main frame with chrome dial, stainless-steel front and rear nozzles, retractable behind protective shield
- Slim 6mm Mounting Plate: 33cm long × 12cm wide — sits between bowl and existing seat without lifting it
- Brass T-Adapter: 1/2" × 7/8" copper interface — connects to the toilet's existing cold-water supply line
- 26-Inch Braided Cold-Water Hose: Connects T-adapter to bidet body, no warm-water plumbing required
- Mounting Hardware + Washers: Everything to install in 15 minutes — no extra hardware-store run
Quick Answers Before You Install
Will this actually fit my toilet?
It fits roughly 90% of standard North American toilets. Quick check before ordering: from the toilet center to the front edge should be under 7.9 inches, and the spacing between your seat's two screw holes should fall between 4.3 and 7.4 inches. Skirted-front "smart" bowls and some compact European bowls won't fit.
Cold water only — is that a deal-breaker?
Most first-time users say the cold sensation is shocking for two seconds and then unnoticeable — and on the lowest pressure setting, the contact is brief. Cold-water-only is also what makes HydraPurify™ non-electric, leak-proof, and a fraction of the price of a heated unit.
Do I really not need a plumber?
No. The brass T-adapter splits the existing cold-water supply at your tank with a single threaded connection. If you can change a shower head, you can install this. The included instructions walk through every step.
How clean are the nozzles between uses?
Both nozzles sit retracted behind a protective shield when off, and run a self-rinsing cycle every time you switch the dial. The water hitting you is fresh from the supply line — never recirculated, never sitting in a tank.
Is this safe for sensitive skin, postpartum, or hemorrhoid recovery?
Yes — and these are the buyers who get the most out of it. Use the lowest pressure setting and the gentle front nozzle. It's the same principle as a peri bottle, hands-free.
60-Day "Stop Wiping Raw" Guarantee
Install HydraPurify™, use it for 60 days, and if you'd rather go back to toilet paper and wet wipes, send it back for a full refund — no return shipping cost, no restocking fee, no questions about why. The skepticism about bidets is fair. The risk is ours, not yours.
What our customers have to say:
Arvilaro Guarantees
Rated 4.6 / 5 based on 1289 reviews. Showing our 4 and 5-star reviews.