VelaPure™ — Run Two Water Outlets From One Tap, Leak-Free and Clutter-Free
High Quality
Free US Shipping
Easy 30 day Returns
Almost out of stock
Get Two Independent Water Outlets From One Tap—Without the Splitter Mess Behind Your Wall
Want your rain shower, handheld sprayer, and tub outlet all running off one fixture—each on its own control? The VelaPure™ Dual Control Tap puts two separate valves inside one solid-brass body, so you set the flow for each outlet on its own and shut either one off independently. No tangle of adapters. No drips. Built in matte black brass that hides water spots, so your daily rinse stays clean and quiet.
Stop Juggling Cheap Splitters and a Tangle of Hoses
If you've ever rigged up a plastic splitter to feed two outlets, you know how it ends: stripped threads, a slow drip you can't trace, and a pile of adapters crammed behind the toilet. Those cheap parts crack within a few months and leak at every joint. VelaPure™ replaces all of it with one brass body and two independent controls—so there's nothing to tangle, nothing to strip, and nothing to leak.
➤ Two Outlets You Control Separately: Dial in the exact flow for each outlet on its own, and shut either one off with a single press. Run the handheld while the rain head waits—your setup, your way, no compromise between the two.
➤ Installs Without a Plumber: Hand-tighten onto a standard supply line, or use the no-drill tank-mount option. Most people have it running in minutes—no professional tools, no holes in the wall, no callout fee.
➤ Matte Black Brass That Stays Sharp: The finish hides water spots and fingerprints, so a quick wipe keeps it looking new. Solid brass inside means it won't strip or crack like the plastic splitters it replaces.
Two Separate Valves in One Body—Why It Doesn't Drip Like a Splitter
Inside VelaPure™ are two independent valves, each with its own water-stop. Press one and that outlet runs at the flow you set; press the other and you switch sources with a clean click—no fumbling, no timeout, no cross-flow between the two. Because each path is sealed on its own, shutting one outlet never affects the other.
A plastic splitter forces both outlets through one cheap junction—that single point is where the drips, stripped threads, and pressure loss start. VelaPure™ skips the junction entirely: solid brass internals, sealed valve seats, and two genuinely separate water paths. That's the difference between zero leaks and a fixture you're forever tightening.
Why Renters and Renovators Keep Swapping to VelaPure™
A lot of buyers come in skeptical—they've been burned by plastic splitters before. Then the brass arrives heavier than expected, threads on clean, and simply doesn't leak. "I figured it'd drip like the last one—it's been bone dry for months and matches my black fixtures perfectly," wrote Daniel R. after his install. That's the pattern: people who expected another cheap part, surprised by one that actually holds.
The Fixture You Reach For Every Day Without a Second Thought
✓ One tap does both: Switch between two water sources with a single press—no swapping hoses, no leaning behind the wall to turn a stiff valve.
✓ Goes in without drilling: The no-drill tank-mount option fits most standard setups, so you upgrade in minutes and skip the plumber.
✓ Matches your fixtures and stays clean: Matte black (or gunmetal gray) brass resists spots and smudges—built to look right and last.
Up and Running in 3 Steps—No Plumber Needed
Step 1: Choose your mount—no-drill tank-mount for a fast fit, or wall-mount onto a standard supply line.
Step 2: Hand-tighten the 0.79 in connector and snug it with a wrench—no special tools required.
Step 3: Press either control to switch between rain shower, handheld sprayer, or tub outlet, and set each flow on its own.
| Why Choose VelaPure™ | Old Single Taps | Plastic Splitters |
|---|---|---|
| Two outlets, each with its own control and water-stop | ❌ | ❌ |
| Solid brass body that won't strip or crack | ❌ | ❌ |
| Sealed valve seats with zero cross-flow or drip | ❌ | ❌ |
The Details Buyers Check Before They Install
- Material: Solid brass body and internals—heavier than plastic, won't strip or crack
- Outlets: Two independent outlets, each with its own water-stop control
- Connector: 0.79 in (≈20 mm) thread—fits most standard shower, tub, and toilet supply lines
- Finish: Matte black, with a gunmetal-gray variant—hides water spots and fingerprints
- Mounting: Wall-mount, plus a no-drill tank-mount option
Still Deciding? Here's What People Ask Most
Will VelaPure™ fit my shower and toilet setup?
Its 0.79 in (≈20 mm) connector fits the vast majority of standard shower, tub, and toilet supply lines. Measure your current connection before ordering to be sure.
Do I really not need a plumber?
Correct. Hand-tighten onto the supply line and snug it with a wrench, or use the no-drill tank-mount option. No special tools, no holes in the wall.
Won't it drip like the cheap splitter I had?
No. The two valves are separate, sealed paths in a solid brass body—there's no shared plastic junction to leak from, and shutting one outlet never affects the other.
How do I keep the matte finish clean?
A quick wipe is all it takes. The matte black (and gunmetal-gray) finish masks water spots and fingerprints, so you spend less time scrubbing.
What if it isn't right for my bathroom?
If VelaPure™ doesn't fit or doesn't hold the way you expected, return it within 30 days—no runaround.
VelaPure™ Dual Control Tap — Solid Brass, Sealed Against Leaks, Built to Outlast the Splitter It Replaces
Two independent outlets, each on its own control. A solid-brass body with sealed valve seats and zero cross-flow. A matte black finish that shrugs off water spots. It's the part you install once and stop thinking about—no drips to chase, no adapters to re-tighten. If it doesn't hold the way you expect, send it back within 30 days. Otherwise, it's the last dual-outlet tap your bathroom needs.
What our customers have to say:
Arvilaro Guarantees
Rated 4.6 / 5 based on 1289 reviews. Showing our 4 and 5-star reviews.