TitanEdge™ — Cut Flawless 45° Tile Edges With Zero Wobble or Chipping
High Quality
Free US Shipping
Easy 30 day Returns
Almost out of stock
Cut Clean, Chip-Free 45° Tile Edges — Without Renting a Wet Saw
If you're mid-reno and your freehand bevels keep coming out chipped and crooked, the TitanEdge™ Angle Grinder Stand bolts your 100-type grinder into a rock-solid steel base so every cut lands at a true 45°. It takes the guesswork out of chamfering — no shaky hands, no wasted tiles, no calling a guy to finish the job.
Stop Ruining Tiles Freehand — One Slip Wastes the Whole Piece
Cutting bevels by hand means the grinder skips, the edge chips, and you're throwing another $8 tile in the bin. Manual scoring tools can't do a 45° chamfer at all, and most clamp-free setups still let the disc wander. TitanEdge™ locks the grinder down so the blade can't drift — you get straight, repeatable bevels instead of guesswork.
➤ Bolts down rock solid: A heavy, rust-resistant steel base and 4 lock-down knobs hold the grinder dead still, so vibration can't push your line off true.
➤ Built-in water feed kills the dust: The quick-connect water port runs a thin stream over the blade — less choking dust, a cooler disc, and cleaner cuts on porcelain and stone.
➤ Adjusts for any tile thickness: Loosen the knobs, slide to your tile, lock it back — every chamfer hits the same 45° whether it's a thin wall tile or a thick floor slab.
Why It Cuts Straight When Your Hands Can't
Drop your grinder into the cradle, snug down the four knobs, and the tool stops being something you wrestle. The base carries the weight, the angled bed holds the exact 45°, and the wide non-slip handle gives you one job: feed the tile in. The blade does the work in a fixed line — that's the whole reason the edge comes out clean.
Freehand, you're fighting the spin of the disc the entire cut. Clamp it into TitanEdge™ and that fight is gone — plus the water feed flushes grit away so the diamond blade isn't grinding through its own dust. Cooler blade, less chipping, longer disc life.
Why DIYers and Tilers Keep This One in the Van
From first-timers redoing a bathroom to pros cutting outside corners all day, the people who switch stop apologizing for chipped edges. "Honestly skeptical it'd beat freehand — first cut came out cleaner than my last whole job. No more wasted tiles." — Marcus T.
What You Get Once It's Bolted In
✓ Edges that actually line up: Mitered corners meet tight and clean — the kind of finish that looks like a tiler did it.
✓ Fewer tiles in the bin: Cut it right the first time instead of buying spares to cover your mistakes.
✓ Move through the job faster: No re-measuring, no re-cutting — slide, lock, cut, repeat.
3 Steps, No Extra Tools
Step 1: Clamp your 100-type grinder (collar up to 1.77 inch) into the base and lock the four knobs.
Step 2: Connect a water hose to the quick-fit port and set your tile against the bed.
Step 3: Feed the tile through for a steady, chip-free 45° bevel every time.
| TitanEdge™ Angle Grinder Stand | Cutting Freehand | Other Stands |
|---|---|---|
| ✅ 4-knob clamp locks out wobble | ❌ Disc wanders and chips the edge | ❌ Weak or fiddly clamping |
| ✅ Built-in water feed for dust + cooler blade | ❌ Clouds of dry dust, hot disc | ❌ Often no water port at all |
| ✅ Heavy rust-resistant steel base | ❌ Nothing holding the tool steady | ❌ Thin metal that flexes |
| ✅ Quick adjust for any tile thickness | ❌ Re-measure and hope every time | ❌ Limited or locked settings |
INSTALLATION, FEATURES, SPECIFICATIONS, AND PACKAGE DETAILS
- Compatible Grinder: Universal 100-type (Φ100) angle grinders, collar/spindle clearance up to 4.5 cm / 1.77 inch
- Material: Heavy-duty rust-resistant steel base with non-slip ABS handle
- Cutting Angle: Fixed 45° bevel
- Water Cooling: Built-in quick-connect water port for wet cutting and dust control
- Base Size: 13.5 cm / 5.31 in × 17.5 cm / 6.88 in; overall height 23.5 cm / 9.25 in
Got Questions? Let's Clear Them Up.
Will this fit my angle grinder?
It's built for universal 100-type (Φ100) grinders with a collar up to 1.77 inch. Check that measurement on your tool — if it fits the cradle, you're good to go.
Do I have to use water with it?
You can cut dry, but hooking up the water port keeps dust down and the blade cooler — that's what gives you the cleanest, chip-free edge on porcelain and stone.
Does it really stop the vibration?
Yes — the four knobs clamp the grinder against a heavy steel base so it can't shift mid-cut. That fixed line is the whole reason the bevel comes out straight.
How hard is it to set up?
Clamp the grinder in, snug the knobs, connect the hose — that's it. No extra tools, ready to cut in a couple of minutes.
Any safety tips before I start?
Wear gloves and eye protection, confirm your grinder is locked in tight, and use a blade rated for your material. Standard grinder safety, nothing unusual.
Cut Clean Corners Without the Stress — Or Your Money Back
Built from heavy steel to take the worst of a tile job, TitanEdge™ turns the most nerve-wracking cut of the whole reno into the easy part. If it doesn't give you straight, chip-free 45° edges on your tile, send it back and we'll refund every penny — that's how confident we are it'll hold its line.
What our customers have to say:
Arvilaro Guarantees
Rated 4.6 / 5 based on 1289 reviews. Showing our 4 and 5-star reviews.